Makita BHP343 Instruction Manual
Makita BHP343 Instruction Manual

Makita BHP343 Instruction Manual

Cordless hammer driver drill
Hide thumbs Also See for BHP343:

Advertisement

INSTRUCTION MANUAL
Cordless Hammer Driver Drill
BHP343
BHP453
009083
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1

Advertisement

Table of Contents
loading

Summary of Contents for Makita BHP343

  • Page 1 INSTRUCTION MANUAL Cordless Hammer Driver Drill BHP343 BHP453 009083 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
  • Page 2: Specifications

    (tri-axial vector sum) determined according to EN60745-2-1: Work mode: impact drilling into concrete For Model BHP343 Vibration emission (a ) : 7.5 m/s ENG101-1 h,ID For European countries only Uncertainty (K) : 1.5 m/s Noise ENG302-1...
  • Page 3: General Power Tool Safety Warnings

    Personal safety Authorized Representative in Europe: 10. Stay alert, watch what you are doing and use Makita International Europe Ltd. common sense when operating a power tool. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 Do not use a power tool while you are tired or...
  • Page 4: Specific Safety Rules

    Power tool use and care Service 17. Do not force the power tool. Use the correct 28. Have your power tool serviced by a qualified power tool for your application. The correct repair person using only identical replacement power tool will do the job better and safer at the parts.
  • Page 5: Functional Description

    ENC007-2 FUNCTIONAL DESCRIPTION IMPORTANT SAFETY CAUTION: INSTRUCTIONS Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. FOR BATTERY CARTRIDGE Installing or removing battery cartridge Before using battery cartridge, read all instructions and cautionary markings on (1) 1.
  • Page 6: Speed Change

    To start the tool, simply pull the switch trigger. Tool Do not use the speed change lever while the tool is • speed is increased by increasing pressure on the switch running. The tool may be damaged. trigger. Release the switch trigger to stop. Selecting the action mode Reversing switch action 1.
  • Page 7: Screwdriving Operation

    ASSEMBLY Blow-out bulb (optional accessory) 1. Blow-out bulb CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before carrying out any work on the tool. Installing or removing driver bit or drill bit 1.
  • Page 8: Drilling Operation

    If you need any assistance for more details regarding There is a tremendous force exerted on the tool/bit • these accessories, ask your local Makita Service Center. at the time of hole break through. Hold the tool Drill bits •...
  • Page 12 Makita Corporation Anjo, Aichi, Japan 884820-224...

This manual is also suitable for:

Bhp453

Table of Contents