Thread Catcher Reverse Position - Pfaff 1243 Adjustment Manual

Adjustment
13

Thread catcher reverse position

.05.13
O Move the machine to the needle rise position and activate the engaging lever, ensuring
O Move the rock shaft 2 to its left turning point by continuing to turn the handwheel.
O While maintaining this position, turn the thread catcher 3 according to the rule.
O Tighten the screw 1 in this position, ensuring that there is no vertical play.
36
Rule
The back edge of the thread catcher 3 should be flush with the cutting edge of the
knife 4 when it is in the front turning point ( see arrow).
4
2
Fig. 13 - 31
that the screw 1 is loosened.
(make this adjustment on both thread catchers with
the PFAFF 1244)
3
1
4
3