At^sstgi Remote-Sat Get Information - Play Tone (32) - Siemens MC35 Terminal User Manual

Remote-SAT User's Guide
P R E L I M I N A R Y
1.4.9 AT^SSTGI Remote-SAT Get Information – Play Tone (32)
Write command
This command is to be used upon receiving an unsolicited result code
^SSTN:32.
AT^SSTGI=32
The Module has been instructed to make an audible tone, and may pass the TA
some information to support this.
Text and an Icon Identifier can be passed to the TA to display to the user.
Response
^SSTGI: <cmdType>, <commandDetails>, <infoText>, <iconQualifier>, <iconId>
<CR> <LF>
Parameters
<cmdType>
<commandDetails>
<infoText>
<iconQualifier>
<iconId>
Reference Note
Siemens Command is issued if the SIM application requests playing a tone with a length
more than 5 seconds.
MC35_SAT_01_V01.01a - Preliminary
32 – Proactive command ID, see Table 1
This byte is RFU.
String to accompany tone
Unsigned Integer, range 0 – 255, used as a bitfield.
bit 1: 0 = icon is self explanatory and replaces text
1 = icon is not self-explanatory and shall be
displayed with the text
Determined value only if associated icon id is
not 0 (an icon exists).
bits 2-8: = RFU
0-255, 0: no icon
Page 31 of 64 15.11.2001