List Of New At-Commands; At Commands For Sim Application Toolkit (Gsm 11.14); At Commands Originating From Gsm 07.07; Table 5-6: At Commands For Sat - Siemens TC35i Migration Manual

TC35i: Migration from TC35 to TC35i
P R E L I M I N A R Y
# AT
TC35i
<audioMode>
1 Audio mode 1: Standard mode optimised for the
default handset, that can be connected to the
analogue interface 1 (see your "Hardware Interface
Description" for information on this handset.) To
adjust the volume use the knob of the default
handset. This handset can be used in audio mode 4
with user defined parameters.
Note: The default parameters are determined for type
approval and are not adjustable with AT commands.
163 AT^SNFV Set loudspeaker volume
164 AT^SNFW Write audio setting in non-volatile store
Differing implementation and notes
TC35i
ME stores the following audio parameter values in
non-volatile memory:<audioMode>, <inBbcGain>,
<inCalibrate>, <outBbcGain>, <outCalibrate[0]>
... <outCalibrate[4]>, <side Tone>
165 AT^SPBC Search the first entry in the sorted telephone book
166 AT^SPBG Read entry from active telephone book via sorted index
167 AT^SPBS Steps the selected phonebook alphabetically
168 AT^SPIC Display PIN counter
169 AT^SPLM Read the PLMN list
170 AT^SPLR Read entry from the preferred operators list
171 AT^SPLW Write an entry to the preferred operators list
172 AT^SPWD Change password for a lock
173 AT^SSCONF SMS Configuration
174 AT^SSDA Set Display Availability
175 AT^SSYNC Configure SYNC Pin
Differing notes on implementation (references to TC35T) and operating modes
176 AT^STCD Display Total Call Duration
5.3

List of new AT-Commands

This chapter lists only new commands, supported exclusively by TC35i.

AT Commands for SIM Application Toolkit (GSM 11.14)

5.3.1

Table 5-6: AT commands for SAT

# AT
1 AT^SSTA Remote-SAT Interface Activation
2 AT^SSTN Remote-SAT Notification
3 AT^SSTGI Remote-SAT Get Information
4 AT^SSTR Remote-SAT Response

AT Commands originating from GSM 07.07

5.3.2

Table 5-7: AT commands from GSM 07.07- new

# AT
5 AT+CCWA Call waiting
6 AT+CCUG Closed User Group
7 AT+CMER Mobile Equipment Event Reporting
TC35_TC35i_MIG_01_V01.01
Command
TC35
<audMode>
1 Audio mode 1: Standard mode optimised for the
default handset, that can be connected to the
analogue interface 1 (see your "Hardware Interface
Description" for information on this handset.) To
adjust the volume use the knob of the default
handset. In audio mode 4 and 5, this handset can
be used with user defined parameters.
Note: The default parameters are determined for
type approval and are not adjustable with AT
commands.
TC35
Saved parameters: <inBbcGain>, <inCalibrate>,
<outBbcGain>, <outCalibrate[0]> ...
<outCalibrate[4]>, <side Tone>
Command
Command
29.1.2003 Page 32 of 34