Remote Answer-On - Radio Shack TAD-799 Owner's Manual

43-799.fm Page 16 Monday, August 16, 1999 9:43 AM
2. Press or
SKIP REPEAT
first digit, then press
ond digit flashes.
3. Press or
SKIP REPEAT
second digit, then press
third digit flashes.
4. Press or
SKIP REPEAT
third digit, then press
TAD beeps once and displays the
new security code in sequence.

REMOTE ANSWER-ON

Note: You must record an outgoing
message before you can remotely set
the TAD to answer calls.
Follow these steps to remotely set the
TAD to answer calls.
1. Dial your phone number.
• If the TAD is set to answer-off, it
answers the call after 60 seconds
and announces, "Answer off."
16
to set the
. The sec-
STOP
2. Within 8 seconds, enter the remote
3. Press
to set the
. The
STOP
to set the
. The
STOP
• If the TAD is set to answer-on, it
answers according to the num-
ber of rings you set.
operation security code. The TAD
beeps. (If you do not enter the code
within 8 seconds, the TAD discon-
nects.)
. The TAD beeps and
#
announces, "Answer on." You can
hang up at this point or enter other
remote commands (see "Notes:" on
Page 17).