The Internet Protocol Properties dialog appears as shown in Figure 27.
8. On the General tab, ensure that both the Obtain an IP address automatically and
Obtain DNS server address automatically options are selected. If not, select
them.
OK
9. Click
.
10. Confirm that you have an IP address:
a. Click Start > Run.
b. Type cmd and click
c. Type
ipconfig/renew
d. Make sure an IP address is shown on the line that starts with IP Address.
Configuring a Mac computer to use DHCP
1. From the Mac interface, select
The System Preferences menu appears.
Figure 27: Internet Protocol Properties – Windows XP
OK
.
and press
System Preferences
Enter
.
.
Appendix A • Computer settings
1039111-0001 Revision A
35