Selection Of Digital Optical/Coaxial Inputs; Selection Of Analogue Aux 1 / Aux 2 Inputs; Tv Selection - Eltax AVR-280 Instruction Manual

Selection of digital optical / coaxial inputs
STANDBY
DIGITAL DVD/SAT
COAX
TV AUX 1
BAND RDS MEMORY
SPK
DSP
MODE MODE
CENTER BALANCE
+ +
DELAY
-
TUNING +
MANUAL
Digital 1: Optical digital input
PR -
Digital 2: Coaxial digital input
AUTO
Centre delay: The centre channel is delayed if the front speakers are placed very far apart!
Surround delay: Depending on the listening position the surround channels should be reduced or increased. MUTE TUNING -
The distance from the listening position to all the individual speakers should be the same.
VOLUME
Night: Press this key for dynamic compression of the DTS or Dolby Digital sound. This can be used to
reduce strong dynamic peaks. The difference between the murmur of a river and a bomb explosion is
AVR-280
reduced.

Selection of analogue AUX 1 / AUX 2 inputs

STANDBY
DIGITAL DVD/SAT
COAX
TV AUX 1
BAND RDS
SPK DSP
MODE MODE
CENTER BALANCE
+ +

TV selection

DELAY
-
PR -
STANDBY
MUTE
DIGITAL DVD/SAT
COAX
TV AUX 1
BAND
SPK
MODE MODE
CENTER BALANCE
+ +
DELAY
-
OPERATION AND FUNCTIONS
OPT
AUX 2 TUNER
MONO
NIGHT TEST
MODE REAR
+ +
DELAY
-
PR +
BASS
BOOST
R
OPT
AUX 2 TUNER
MEMORY MONO
NIGHT TEST
MODE REAR
+ +
DELAY
-
TUNING +
MANUAL
PR +
AUTO
BASS
TUNING - BOOST
OPT
VOLUME
AUX 2 TUNER
AVR-280
RDS MEMORY MONO
DSP
NIGHT TEST
MODE REAR
+ +
DELAY
R -
TUNING +
Press the DIGITAL OPT/DIGITAL COAX keys to
activate the digital inputs. Check that the Setup (digital
output) of the peripheral devices are set at RAW and
bitstream respectively.
Depending on the size of the room, the speakers may
be configured through CENTRE DELAY and
SURROUND DELAY.
Selection is also possible through the front panel by
pressing the INPUT key repeatedly.
Press the AUX 1/ AUX 2 keys to activate the analogue
inputs.
Selection is also possible through the front panel by
pressing the INPUT key repeatedly.
Press the TV key to activate the analogue SCART
input/output.
Selection is also possible through the front panel by
pressing the INPUT key repeatedly.
18