Loudspeaker Setup; Dsp, Mode, Mute And Bass Boost - Eltax AVR-280 Instruction Manual

STANDBY

Loudspeaker setup

DIGITAL DVD/SAT
TV
BAND
SPK
MODE
5
CENTER BALANCE
3
+ +
DELAY
-
PR -
MUTE
1
2
4
MODE DSP INPUT BALANCE TUNING BAND
* SPK CON I: This option should be selected if the
system speakers are powerful enough to reproduce
the entire frequency range.
STANDBY
STANDBY
DIGITAL DVD/SAT
COAX
DIGITAL DVD/SAT
COAX

DSP, Mode, Mute and Bass Boost

TV AUX 1
TV AUX 1
BAND RDS
BAND RDS
SPK DSP
MODE
MODE
SPK
DSP
MODE MODE
2
CENTER BALANCE
+ +
CENTER BALANCE
1
+ +
DELAY
DELAY -
-
TUNING +
TUNING +
MANUAL
MANUAL
PR -
PR -
MUTE TUNING -
MUTE TUNING -
3
4
VOLUME
VOLUME
AVR-280 AVR-280
OPERATION AND FUNCTIONS
COAX OPT
AUX 1 AUX 2 TUNER
RDS MEMORY MONO
DSP
MODE NIGHT TEST
MODE REAR
+ +
DELAY
-
TUNING +
MANUAL
PR +
AUTO
BASS
BOOST
TUNING -
VOLUME
AVR-280
VOLUME/TUNING
R
OPT
OPT
AUX 2 TUNER
AUX 2 TUNER
MEMORY MONO
MEMORY MONO
NIGHT TEST
TEST
NIGHT
MODE REAR
+ +
MODE REAR
+ +
DELAY
DELAY
-
-
PR +
PR +
AUTO
AUTO
BASS
BASS
BOOST
BOOST
R
R
1
Press the VOL+ key to increase the volume, press
the VOL- key to decrease the volume.
2
Turn Multijog to the right to increase the volume and
to the left to decrease the volume
3
Press the BALANCE key repeatedly and then the
VOL+/- keys to adjust the volume for all channels.
This way you control the balance of the front
speakers and the volume of the centre speaker,
subwoofer and rear speakers.
4
Press the BALANCE key on the front panel
repeatedly and then turn Multijog (2) to adjust the
volume for all channels. This way you control the
balance of the front speakers and the volume of
centre speaker, subwoofer and rear speakers.
5
Press the SPK MODE key until "SPK CON I"* or
"SPK CON II"* is displayed. This menu will also
appear if you press the BALANCE key repeatedly.
Select the settings by means of Multijog (2).
* SPK CON II: This option should be selected if the
corresponding speakers are not powerful enough to
reproduce the lower frequencies of the audio signal. If
so, channel frequencies below 180 Hz are led to the
subwoofer.
1
Press the MODE key on the remote control or on the
receiver to switch between stereo, ProLogic II-Movie
and ProLogic II-Music. DTS and Dolby Digital can
also be selected in connection with the digital inputs.
2 Press the DSP MODE key to switch between various
preset equaliser modes. The DSP MODE key is also
available on the receiver.
Press the MUTE key to make all speakers silent. This
3
is an advantage for instance if the telephone rings.
4
Use the BASS BOOST key to switch the bass boost
on or off.
15