Installation And Connection Of Fm Indoor- Antenna; Fm Cable Connection - Eltax AVR-280 Instruction Manual

Installation and connection of FM antenna
Connect the FM indoor antenna to the antenna connection marked FM 75. For this
purpose, place the cable shoe on the pin in the middle of the connecting bush.
Tune in to a station and place the antenna in the position where the best and clearest
signal is received. If the signal quality is not satisfactory, an outdoor antenna may be
required.

FM cable connection

If you have cable television, the cable network radio connection may also be connected to this bushing.
Use a 75 Ohm antenna cable for this purpose.
R
R
75 Ohm Antenna cable
12
SYSTEM SETUP
OPT. VIDEO COAX VIDEO
DIGITAL DIGITAL
OPT. VIDEO COAX VIDEO
DIGITAL DIGITAL
AV RECEI
ITEM NR.:
AUX 1 AUX 2 SUB
AV RECEI
ITEM NR.:
AUX 1 AUX 2 SUB
AVR-280
11040.0
SCA
AVR-28
11040.0
SCA