Table of Contents
Advertisement
Installation of AM antenna
Install the AM antenna by mounting it on the fixing device (see
illustration).
Place the antenna in the position where the best signal is
received, as far away from the system, the television set and
the cables as possible. If the signal quality is not satisfactory,
an outdoor antenna may be required.
Connection of AM antenna
Connect the two loop antenna wires to the inputs marked AM (see illustration).
Press the corresponding button (1), insert the bare cable end into the opening
(2) and release the button again.
SYSTEM SETUP
R
OPT. VIDEO COAX VIDEO
DIGITAL
11
DIGITAL
AUX 1 AUX 2
SUB
AV RECEIVER
AVR-280
ITEM NR.:
11040.01
220-240V~ 50/60Hz
200W MAX
SCART IN/OUT
Hide quick links:
Advertisement
Table of Contents
