Install Input And Output Assemblies Into Main Transmission Housing - Traxxas TRX-4 Assembly Manual

A. TRANSMISSION ASSEMBLY
TRANSMISSION BAG A4. Install input and output assemblies into main transmission housing
Shift Fork
5x8x0.5mm PTFE Washer (2)
2.5x8mm CS (5)
6 • TRAXXAS TRX-4
1
Place washers on output assembly
5x8x0.5mm
PTFE Washer
2
Place shift fork into shift dog recess
4
Secure transmission case halves together
2.5x8mm CS
3
Place assemblies into transmission case halves
5x8x0.5mm
PTFE Washer
Input Gear
Assembly
Shift Fork
2.5x8mm CS
Align the shift fork with the pin molded in
the transmission case half.
24T Output
Gear and
Drive Hub
Assembly