Attach Ball Cups To Differential Locking Cables; Assemble Front And Rear Driveshafts - Traxxas TRX-4 Assembly Manual

G. SUSPENSION & DRIVELINE INSTALLATION
SUSPENSION LINK BAG G7. Attach ball cups to differential locking cables
2.6x8mm BCS (2)
Axle Ball Cup (2)
It is okay to slightly rock
horn to align ball cup.
Do not turn servo shaft
by hand or you could
damage the servo.
SAFE
NO! NO!
DRIVELINE BAG G8. Assemble front and rear driveshafts
3x6mm BCS (4)
CV Cross Pin (4)
Stock Pin (4)
CV Cup (4)
CV Ball (4)
Short Female
Half Shafts (3)
Long Female
Half Shaft
Male Half Shafts (2)
CV Pin Retainer (4)
ACCESSORY
Option Part
8140 Lift Kit
8140X Lift Kit
38 • TRAXXAS TRX-4
1
Differential
Cable
3
Short half shaft assembly
CV Ball
Short Female
x3 CV Cross Pin
Front driveshaft
Stock
Pin
CV Pin
Retainer Short Half
Shaft Assembly
CV Cup
Ensure stock pins
are installed parallel
to each other.
2
Axle Ball Cup
4
Long half shaft assembly
3x6mm
BCS
CV Ball
Half Shaft
x1
Stock
Pin
Short Half
Shaft Assembly
CV Cup
Male Half
Shaft
Male Half
Stock
Pin
Short Half
Shaft Assembly
CV Cup
CV Pin
Retainer
Screw ball cup on until all threads are hidden
2.6x8mm
BCS
Long Female
Half Shaft
CV Cross Pin
CV Pin
Ensure stock pins
Retainer
are installed parallel
to each other.
Stock
Pin
Long Half Shaft
Assembly
Shaft
2.6x8mm
BCS
3x6mm
BCS
CV Pin
Retainer
CV Cup
Rear driveshaft