Install T-Lock Servos Onto Chassis; Install Receiver Bottom Foam; Install Antenna From Receiver On Right Floor Pan - Traxxas TRX-4 Assembly Manual

F. ELECTRONICS INSTALLATION
ELECTRONICS BAG F6. Install T-Lock servos onto chassis
Chassis T-Lock Servo Mount
2065 Servo (2)
3x8mm BCS (6)
F7. Install receiver bottom foam
ELECTRONICS BAG
Receiver Box Foam Seal
Antenna Tube
Antenna Cap
3x4mm GS
30 • TRAXXAS TRX-4
1
3x8mm 3x8mm
BCS BCS
Chassis T-Lock Servo Mount
Note servo arm orientation. Ball cup mounts should be
on the same side as the top loop of servo mount.
2
Note wire routing
3
F8. Install antenna from receiver on right floor pan
Antenna Cap
2
3x4mm GS
Route wires
from the ESC
and the shift servo
through the top
loop of the T-Lock
servo mount before
installing the mount
on the chassis.
4
3x8mm
BCS
1
Antenna Tube