Install Bearings Into The Transfer Case; Assemble And Install Transfer Case Gears - Traxxas TRX-4 Assembly Manual

A. TRANSMISSION ASSEMBLY
TRANSMISSION BAG A5. Install bearings into the transfer case
Transfer Case Cover
5x11x4mm BB (5)
Note: Bearing Seating
Press down hard to ensure
bearings are fully seated.
3
7
7
A6. Assemble and install transfer case gears
TRANSMISSION BAG
Long Transfer Case
Output Shaft
Short Transfer Case
Output Shaft
2x9.8 Pin (3)
27T Transfer Case Gear (3)
5x8x0.5mm PTFE Washer (2)
TOOLS BAG
High Performance Grease
1
27T transfer case gear assembly
Insert pin
3
Long output shaft assembly
Apply drop
of grease
Apply drop
of grease
5x8x0.5mm
PTFE Washer
2
Short output shaft assembly
Apply drop
5x8x0.5mm
PTFE Washer
TRAXXAS TRX-4 • 7
of grease