Table of Contents
Advertisement
or Off in Phone Mode. The Escalating volume setting
rises in steps from the lowest to the highest level as the
terminal continues to ring.
Alert
Alert allows you to set the sound, vibrator, or both for
incoming call notification.
Call Data Menu
The
Ã86GGÃ96U6
for providing information on calls that have been made
from or received by the terminal.
ReceiveLog
If you have Caller ID from your service provider, this
menu lists the last 20 calls received with caller ID (the
latest call appears first). Press
shown in the display.
Note!
The Auto Area feature does not insert the area code in a
phone number shown in the display by ReceiveLog.
Use the arrow keys to scroll through the list of received
calls. If the received number is stored in memory with a
name, the name is also shown in the display.
Last Time
The Last Time function indicates the approximate dura-
tion of the last call, in minutes and seconds.
Menu Descriptions
Menu contains the following choices
to dial a number
YES
Elapsed
The Elapsed time meter shows the hours and minutes
that have been used. The elapsed time cannot be reset.
Press
to exit.
NO
Call Count
The Call Count function indicates the total number of
calls made from the current phone number shown in the
display. Press
return to the total count display. To reset from Standby
Ö
Mode, press
Time Count
The Time Count function shows the approximate total
time that the terminal has been in use. Press
play the home count. Press
count display. To reset from Standby Mode, press
Ö Ö
75
, and then press
Locks Menu
The
GP8FT
enabling protection services in the terminal to limit its
use. You can select the lock options most useful for your
desired level of terminal security. You must enter your
security code before you can open the
Ö
to display the home count. Press
Ö Ö
74
, and then press
to reset.
YES
Ö
to dis-
Ó
to return to the total
to reset.
YES
Menu contains the following choices for
Menu.
GP8FT
Ó
to
Ö
45
Advertisement
Table of Contents
