Table of Contents
Advertisement
AccessTone
When enabled, AccessTone sounds three short beeps to
indicate your outgoing call has connected to the system.
Sounds Menu
The
TPVI9T
setting the different volumes and sounds for ringing,
keypad, speaker, and handsfree kits.
SilentMode
When SilentMode is enabled, your terminal does not
make any keypad or ringing sounds in Phone Mode. You
can quickly activate SilentMode by pressing
Ö
Press
, then # again to disable SilentMode. The word
Silent is shown in the display when the terminal is in
Silent Mode.
Msg Tone
This feature allows you to turn on or off the tone that
sounds when an incoming text message is received or a
message waiting signal is received.
Key Sound
Key Sound allows you to choose the sound made when
you press keys: a click, a continuous tone, a quick tone
burst, or no sound at all in Phone Mode.
44
Menu contains the following choices for
Ö
, then #.
Key Volume
Key Volume allows you to select the volume level of the
sounds made when you press keys in Phone Mode.
Ear Volume
Ear Volume allows you to adjust the volume of the
speaker using the menu setting. You can also adjust the
volume during a call by pressing
side volume keys in Phone Mode.
Handsfree Volume
HandsF Vol allows you to set the speaker volume when
you are in Phone Mode.
Ring Pulse
Ring Pulse allows you to choose the type of tone for the
ring pulse in Phone Mode. Each tone is demonstrated as
you scroll through the selections. There is also a System
Set selection, which is controlled by the system.
Ring Pitch
Ring Pitch allows you to adjust the ring pitch from Low,
Medium, High, or Mixed, and demonstrates those tones
as you scroll through the selections in Phone Mode.
There is also a System Set selection, which is controlled
by the system.
Ring Volume
Ring Volume allows you to set the level of the ring vol-
ume from Extra Low, Low, Medium, High, Escalating,
Ó
Ö
or
, or by using the
Menu Descriptions
Advertisement
Table of Contents
