Service Notification - Lochinvar ECOKNIGHT EKW46CE Installation Manual

21.9

SERVICE NOTIFICATION

21.9.1
SERVICE NOTIFICATION IN MONTHS
When the water heater control determines that a scheduled service is due based on days of installation, the water heater display
will turn yellow and a new status screen will appear informing the user that maintenance is required. This parameter is adjustable
by the installer by accessing the Service Notification in Months parameter. The time range for this parameter is 0 months to
100 months. The default time is 12 months.
21.9.2
SERVICE NOTIFICATION RUNNING TIME
When the water heater control determines that a scheduled service is due based on the hours of actual operation, the water heater
display will turn yellow and a new status screen will appear informing the user that maintenance is required. This parameter is
adjustable by the installer by accessing the Service Notification Running Time parameter. The time range for this parameter is 0
hours to 17,500 hours. The default time is 8,760 hours.
21.9.3
SERVICE NOTIFICATION CYCLES
When the water heater control determines that a scheduled service is due based on the number of water heater cycles, the water
heater display will turn yellow and a new status screen will appear informing the user that maintenance is required. This parameter
is adjustable by the installer by accessing the Service Notification Cycles parameter. The range for this parameter is 0 cycles to
100,000 cycles.
The default is 50,000 cycles
RESET MAINTENANCE REMINDER
Once servicing has been completed, the service notification counter should be reset. This parameter can be reset by the installer
by accessing the Reset Maintenance Reminder parameter. Once accessed, press the RESET key to reset the service notification
counter.
21.9.4
SERVICE NAME AND PHONE NUMBER
Please note that the brackets ([]) denote screen status.
When a Maintenance Reminder timer or counter has expired, a Maintenance Reminder screen will appear on the display. By
programming the installer's name and phone number, this information will appear on the Maintenance Reminder Screen at that
time. This can be programmed by accessing the Service Name and Phone Number parameter. When selected, another menu will
appear with PHONE and NAME.
1. Rotate the NAVIGATION dial to point to the name/phone number to program and press the NAVIGATION dial.
The screen will now display the selected item (either PHONE or NAME).
2. Press the NAVIGATION dial again. A cursor will appear at the bottom of the screen. By rotating the NAVIGATION dial,
various numbers and characters will appear. When the desired number/character is found, press the NAVIGATION dial.
The cursor will move to the next position.
3. Repeat this procedure until the entire message is entered. If you make a mistake and wish to back up one character,
rotate the NAVIGATION dial until the back arrow (m) character is displayed and press the NAVIGATION dial.
4. When finished, press the RIGHT SELECT [SAVE] key to return to the previous menu.
80