Configuring Wpa(2)-Psk Encryption - Technicolor TG788v v3 Setup And User Manual

3.3.1 Configuring WPA(2)-PSK encryption

Procedure
Proceed as follows:
1 Browse to the TG788v v3.
For more information, see
2 Click Wireless. The Wireless page appears.
3 In the Security Mode list under Access Point, select one of the following modes:
 WPA2-PSK
This mode provides the highest security. Choose this version if you are sure that all your wireless clients support
WPA2-PSK.
WPA-PSK + WPA2-PSK

Choose this option if not all of your wireless clients support WPA2-PSK, or if you are not sure. Wireless clients that
support WPA2-PSK will use WPA2-PSK, the others will use WPA-PSK.
4 In the Wireless Password box, type a the key of your choice. The key must consist of 8 to 63 alphanumeric characters.
5 Click Save.
6 Reconnect your wireless client(s) to your TG788v v3 using the new security settings.
For more information, see
wireless client" on page
DMS3-CTC-25-281 v2.0
"4.1.1 Accessing the TG788v v3 web interface from your local network" on page
"3.1 Connecting your wireless client via WPS" on page 23
25.
3 Wireless networking
33.
or "3.2 How to manually connect a
27