Sony VENICE MPC-3610 Operating Instructions Manual page 69

000 69 6. Appendix: Error/Warning Indications
Display indication
Input AES/EBU is Invalid Emphasis
Input AES/EBU is not Pro Use
Fan Stopped
AXS Recorder Fan Stopped
Unsupported FPS
Change AXS(A) to AXS S48 Memory
Abnormal Lens Communication
Please Check "Lens IF" Setting
Please Execute APR
Invalid setting value was reset:
Media/Clip Naming/Camera Position
Please save All File again
XXXX License Y days Remaining
(XXXX: Type of license, Y: Number of days remaining)
* "SxS(B)" is displayed for the SxS memory card in slot B, "AXS(A)" is displayed for the AXS memory card in slot A of the AXS-R7,
and "AXS(B)" is displayed for the AXS memory card in slot B of the AXS-R7.
Cause and Solution
Emphasis signal that is not compatible with the AES/
EBU input was input.
The unit is compatible with 50u-15u Emphasis only.
A signal other than Professional Use was input to the
AES/EBU input.
The unit is compatible with Professional Use only.
The fan in the unit has stopped.
Avoid use under high temperature conditions. Turn
the unit off and contact a Sony service representative.
The fan in the AXS-R7 that is connected to the unit
has stopped.
Avoid use under high temperature conditions.
Remove the AXS-R7 from the unit and contact a Sony
service representative.
Unsupported AXS memory was detected.
Recording cannot be performed. Change the
recording format for the AXS memory card, or change
the card to an AXS-A512S48 or AXS-A1TS48.
The type of the connected lens does not match the
unit's setting.
Check the Technical > System Configuration > Lens
Interface setting in the menu.
The auto adjusting of the image sensor (APR) has not
been executed for a certain period.
Execute APR by pressing the MENU dial.
The setting of Clip Naming was reset because an
invalid All-settings file is loaded.
Save the All-settings file again after setting the desired
values.
There are 2 days remaining before the license for the
software option will expire.