User Functions Screen - Sony VENICE MPC-3610 Operating Instructions Manual

000 32 3. Camera Operations

User Functions Screen

You can press the USER button (page 8) to
display the user functions screen on the sub
display and use the ITEM keys 1 to 5 as assignable
buttons (User 1 to 5).
There are also four assignable buttons (pages
6, 7, 8) to which you can assign various
functions.
Functions can be assigned to these buttons using
the user functions screen, in addition to using
Project > Assignable Button in the full menu.
ITEM key 1 ITEM key 2
User 1 User 2
SDI Frame Line Monitor
Status Info LUT bypass
On On
00:00:00:00
STBY
Off Auto
Monitor Fan Mode
Highlight Clip Ind
User 4 User 5
ITEM key 4 ITEM key 5
Changing Button Functions
The user functions selection screen is displayed by
pressing the Edit button (ITEM key 6) on the user
functions screen. You can set the functions for the
User 1 to 5 buttons and assignable buttons 1 to 4
on the user functions selection screen.
User 1
SDI Frame Line
ITEM key 3
User 2
Monitor Status Info
User 3
Monitor LUT bypass
User 4
Monitor Highlight Clip Ind
User 3
User 5
Fan Mode
Monitor
Assign Btn 1
VF Highlight Clip Ind
Off
1
On the user functions selection screen, move
the cursor to the button you want to change,
Edit
and press the Select button (ITEM key 3).
The functions that can be selected are
displayed.
ITEM key 6 Not Assigned
<User 1>
SDI Frame Line
SDI Frame Line
SDI Status Info
SDI LUT bypass
Monitor Frame Line
Monitor Status Info
2
Press the button (ITEM key 2),
(ITEM key 5), or MENU dial to change a setting.
3
When finished, press the Set button (ITEM key
3).
The display returns to the user functions
screen, and displays the changed function.
The following tables lists the functions that are assigned when the unit is shipped from the factory.
Button Function
Assignable 1 Displays clipped highlight areas in red in the
viewfinder.
Assignable 2 No assignment
Assignable 3 No assignment
Assignable 4 No assignment
ITEM key 1 No assignment
Select
ITEM key 2 No assignment
ITEM key 3 No assignment
ITEM key 4 Displays clipped highlight areas in red on the
Monitor output.
ITEM key 5 Sets the fan control mode.
Done
Functions that can be Assigned to ITEM Keys 1 to 5
Assignable Button Function
setting
Not Assigned No assignment
SDI Frame Line Turns superimposition of frame lines on the SDI
Set
3/4 output image on/off.
SDI Status Info Turns display of information on the SDI 3/4 output
image on/off.
SDI LUT bypass Disables the LUT applied to the SDI 3/4 output
image while the key is pressed, and sets Log
image quality without applying a LUT.
Monitor Highlight Clip Turns the function that displays clipped highlight
Cancel
Ind areas in red on the Monitor output image on/off.
Monitor Frame Line Turns superimposition of frame lines on the
Monitor output image on/off.
Monitor Status Info Turns display of information on the Monitor
button
output image on/off.
Monitor LUT bypass Disables the LUT applied to the Monitor output
image while the button is pressed, and sets Log
image quality without applying a LUT.
Color Bars Turns color bars on/off.
AXS Slot Change Switches the active slot when two AXS memory
cards are inserted.
Switches between A and B each time the key is
pressed.
Assignable Button setting
VF Highlight Clip Ind
Not Assigned
Not Assigned
Not Assigned
Not Assigned
Not Assigned
Not Assigned
Monitor Highlight Clip Ind
Fan Mode
State when unit is powered on
–
Setting retained
Setting retained
Setting not retained
Setting retained
Setting retained
Setting retained
Setting not retained
Setting retained
Setting retained