Moving The Printer - Canon Laser Shot LBP5200 User Manual

Moving the Printer

When changing the location of the printer or moving the printer for maintenance, be
sure to perform the following procedure.
WARNING
When you are moving the printer, always turn the printer off, unplug the power
plug, and remove the interface cable. If you move the printer without unplugging
the cables, the electrical cord and interface cable may be damaged, causing a
fire or electrical shock.
CAUTION
•
This printer weighs approximately 22.7 kg (Main Unit: Approx. 17 kg; 4 x Toner
Cartridge: Approx. 3.2 kg; Drum Cartridge: Approx. 2.5 kg). Take care to carry
5
the printer without hurting your back.
•
Never hold the printer by the front panel, ventilation slots, rear panel, or
anywhere else other than the grips for moving the printer. Doing so may cause
the printer to fall, resulting in personal injury.
•
The rear side of the printer is the heavy side. When lifting the printer, take care
not to lose your balance. Doing so may cause the printer to fall, resulting in
personal injury.
5-39

Moving the Printer

The Rear End
is Heavy