System Requirements - Canon Laser Shot LBP5200 User Manual

System Requirements

Your operating environment needs to meet the following requirements for you to
use the printer driver:
■ Operating system
•
Microsoft Windows 98
•
Microsoft Windows Me
•
Microsoft Windows 2000 Server/Professional
•
Microsoft Windows XP Professional/Home Edition
•
Microsoft Windows Server 2003 (32-bit processor version only)
- Operating Environment
CPU
Memory (RAM)*
Hard Disk
* As the actual amount of memory that is available for use differs depending on the configuration of your
computer system and the application you are using, printing cannot be guaranteed in all cases in the above
environments.
- Recommended Environment
CPU
Memory (RAM)
■ Interface
When connecting via USB
•
Windows 98/Me: USB Full-Speed (USB1.1 equivalent)
•
Windows 2000/XP/Server 2003: USB 2.0 Hi-Speed/USB Full-Speed (USB1.1
equivalent)
When connecting via a network (Requires the optional network board)
•
Connector: 10BASE-T or 100BASE-TX
•
Protocol: TCP/IP, NetBIOS/NetBEUI (Windows XP/Server 2003 only supports TCP/IP)
NOTE
•
If you want to use the sounds from the printer driver, a PC synthesizer (and the PCM
synthesizer driver) needs to be installed in your computer. Do not use the PC speaker
driver (speaker.drv).
Windows 98/Me Windows 2000/XP/Server 2003
Pentium Pentium
300MHz or higher 300MHz or higher
Windows 2000: 64MB or more
64MB or more
Windows XP/Server 2003: 128MB or more
20MB or more 15MB or more
Windows 98/Me Windows 2000/XP/Server 2003
Pentium III Pentium III
600MHz or higher 600MHz or higher
Windows 2000: 128MB or more
64MB or more
Windows XP/Server 2003: 256MB or more
(PC/AT Compatibles)
Introduction
3
3-3