Canon Laser Shot LBP5200 User Manual page 216

■ For Windows 2000/XP/Server 2003
1
Open the [Printers and Faxes] folder ([Printers] folder on
Windows 2000), then select [Server Properties] from the [File]
menu.
The [Printer Server Properties] dialog box will appear.
2
Display the [Forms] sheet, then check [Create a New Form].
Specify the following options as needed.
[Form Name]:
[Units]:
[Paper Size]:
[Printer area margins]:
3
After confirming the settings, click [Save Form], and then
click [Close].
Make sure to set the margin to a
value in the range of 0.5 cm to
5.0 cm.
Allows you to enter a name for the custom paper size. ([Form
Description for] is displayed on Windows 2000.)
Select from either [Metric] or [English].
Specifies the length and width of the custom paper size (length
greater than or equal to width). Paper sizes should be specified
in portrait orientation (length greater than or equal to width) and
within the user-definable limits. The valid range of settings for
this printer are width: 7.62 to 21.59 cm and length: 12.70 to
35.56 cm.
Enter a numerical value. The valid range of settings for this
printer are between 0.5 cm and 5.0 cm.
Using the Printing Functions
4
4-49