Table of Contents
Advertisement
Category (
) / Sub category (
Feature
EventTestData
EventTest
EventTestTimestamp
UserSetControl
UserSetSelector
UserSetLoad
UserSetSave
UserSetDefault
UsersetMemoryIndex
UsersetMemoryValue
ChunkDataControl
ChunkModeActive
ChunkSelector
ChunkEnable
ChunkImage
ChunkOffsetX
ChunkOffsetY
ChunkWidth
ChunkHeight
ChunkPixelFormat
ChunkTimestampLatchValue
ChunkExposureTime
ChunkGain
*3
ChunkGainDigitalRed
ChunkGainDigitalGreen
*3
ChunkGainDigitalBlue
TestControl
TestPendingAck
TestEventGenerate
TriggerEventTest
*1 RO: Read only, WO: Write only, RW: Read/Write
*2 Color cameras are RO.
*3 Target models: Color cameras
*4 Enabled when color camera is set to BGR8, YCbCr8, or YCbCr422_8.
*5 Target camera mode: NORMAL
)
Read/
Write
RO
RO
RO
RO
RW
RW
RW
RW
RW
RW
RO
RW
RW
RW
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
*3
RO
RO
RO
RW
RW
WO
Description
*1
Category that contains all the data features related to the
event test generated using the TestEventGenerate command.
Returns the unique identifier of the event test type of event
generated using the TestEventGenerate command.
Returns the timestamp of the event test event.
Category that contains the User Set control
features.
Selects the feature User Set to load.
Loads the User Set specified by UserSetSelector to the
device and makes it active.
Saves the User Set specified by UserSetSelector to the non-
volatile memory of the device.
Selects the feature User Set to load and make active by
default when the device is reset.
Provides the index (offset) of the user-programmable
identifier to access in the UserMemory.
Represents the value found at entry UserMemoryIndex.
Category that contains the Chunk Data control
features.
Activates the inclusion of chunk data in the payload of the
image.
Selects which chunk to enable or control.
Enables the inclusion of the selected chunk data in the
payload of the image.
Returns the entire image data included in the payload.
Returns the OffsetX value of the image included in the
payload.
Returns the OffsetY value of the image included in the
payload.
Returns the Width value of the image included in the
payload.
Returns the Height value of the image included in the
payload.
Returns the PixelFormat value of the image included in the
payload.
Returns the last timestamp latched with the TimestampLatch
command.
Returns the exposure time used to capture the image.
Returns the analog gain used to capture the image.
Returns the digital gain for the red channel used to capture
the image.
Returns the digital gain for the green channel used to capture
the image.
Returns the digital gain for the blue channel used to capture
the image.
Category for Test Control features.
Tests the device's pending acknowledge feature.
Generates a test event.
Generates the test event if the event channel is enabled.
(Alternate command of TestEventGenerate)
39
See
page
–
–
–
33
33
33
33
33
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Advertisement
Table of Contents
