Gpio; Gpi; Gpo - Sony XCU-CG160 Technical Manual

GPIO

GPI

The signal level which is input pin 2 and pin 3 of the DC
power supply input connector can be detected. After
selecting a connector using LineSelector, the signal level
is acquired from LineStatus.

GPO

Various signals can be output from pin 3 and pin 4 of the
DC power supply input connector. Select a connector
using LineSelector, set LineMode to Output, and set
LineSource. The output polarity is set by LineInverter.
Feature Parameter
LineSelector Line1 (0)
Line2 (1)
Line3 (2)
LineMode Input (0)
Output (1)
LineInverter False (0)
True (1)
LineStatus
LineSource TriggerThrough (0) Trigger through
ExposureActive (1) Exposure signal
StrobeActive (2)
SensorReadout (3)
UserOutput0 (4)
UserOutput1 (5)
UserOutput2 (6)
SignalTrue (7)
SignalFalse (8)
PulseGenerator (9)
Setting example:
The strobe control signal is output on GPO2 (pin 3 of
the DC power supply input connector, active-High).
LineSelector = Line2
LineMode = Output
LineInverter = False
LineSource = StrobeActive
Setting
Pin 2 of the DC
power supply input
connector
Pin 3 of the DC
power supply input
connector
Pin 4 of the DC
power supply input
connector
Set to input
Set to output
Without output
inversion
With output inversion
Input signal level
signal
Strobe control signal
Sensor readout signal
User definition 0
User definition 1
User definition 2
H level
L level
Pulse generator signal
28