Table of Contents
Advertisement
Troubleshooting continue...
You need to replace the batteries. Please note the
"I try to recharge
following safety warnings:
the batteries, but
I still get a warning
that they are low."
To
de register
Use the following procedure:
"How to de-register a
1
Handset from the Base
unit."
2
3
4
5
6
WARNING: You should not use this function unless
the Handset has lost registration.
If the fault persists ...
Disconnect all other instruments connected to the same
line as the
Disconnect the Base unit from the telephone line and
plug a different phone into the master telephone socket.
Try making a call. If this works, the line is OK.
If the call does not work, and you are using a two-way
socket adapter, remove it and plug a telephone directly
into the socket. If the call now works, the adapter may be
faulty.
If you cannot make a call, the fault may be on the
line. Contact the service provider (the your cabe company).
If you still cannot identify the cause of the problem,
contact the Help Line on 888 453 7440
Toll free from the US and Canada.
Use only rechargeable batteries in the Handset. The
best way to make sure you get the right ones is to take
the old ones with you when you go to buy new ones.
Dispose of used batteries safely - never burn them, or
put them where they could get punctured.
a Handset
Press
soft
button
Menu
display shows
HANDSET
Press DOWN button until
Press
soft
button
Select
display shows
DIAL MODE
Press DOWN button until
option is highlighted.
Press
soft
button
Select
display shows
CONFIRM?
Press
soft
button
to confirm
OK
iDECT X2i and check if you can make a call.
38
highlighted
option is highlighted.
BASE
DE-REG HS
to confirm
exchange
Advertisement
Table of Contents
