Cisco XR 12000 Series Command Reference Manual page 114

show l2vpn forwarding
summary
unresolved
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.4.0
Release 3.7.0
Usage Guidelines
To use commands of this module, you must be in a user group associated with a task group that includes
appropriate task IDs. If the user group assignment is preventing you from using any command, contact your
AAA administrator for assistance.
Task ID
Task ID
l2vpn
Examples The following sample output is from the show l2vpn forwarding bridge detail location command for IOS-XR
releases 5.3.1 and earlier:
RP/0/0/CPU0:router# show l2vpn forwarding bridge detail location 0/2/cpu0
Bridge-domain name: bg1:bd1, id: 0, state: up
MAC learning: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
Security: disabled
DHCPv4 snooping: profile not known on this node
IGMP snooping: disabled, flooding: disabled
Bridge MTU: 1500 bytes
Number of bridge ports: 1
Number of MAC addresses: 0
Multi-spanning tree instance: 0
GigabitEthernet0/1/0/1.2, state: oper up
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
106
Modification
This command was introduced.
Sample output was updated to add MAC information for the layer2_fib
manager summary.
Operations
read
Virtual Private Network Commands
Displays summary information
about cross-connects in the
layer2_fib manager.
Displays unresolved entries only.
OL-28460-01