8.7
Preparing vehicle for rides on wet and muddy circuits
8.8
Preparing vehicle for high temperatures or slow riding
–
Clean the chain.
–
Mount the steel sprocket.
–
Grease the chain.
Universal oil spray (
–
Clean the radiator fins.
–
Straighten bent radiator fins carefully.
Condition
Regular use in sand
600868-01
–
Change the piston every 10 operating hours.
–
Fit a rain cover on the air filter.
Waterproofing device for air filter (79006921000)
Info
Observe the fitting instructions for Husqvarna Motor-
cycles accessories.
–
Adjust the carburetor jetting and setting.
M01106-01
Info
The recommended carburetor tuning is available from
your authorized Husqvarna Motorcycles workshop.
–
Mount the steel sprocket.
–
Clean the motorcycle. (
–
Straighten bent radiator fins carefully.
600868-01
–
Check the radiator cap.
Value on the radiator cap
»
If the indicated value does not correspond to the setpoint
value:
H02508-01
8 PREPARING FOR USE
p. 152)
p. 131)
1.8 bar (26 psi)
33