Adjusting The Headlight Range; Changing The Combination Instrument - Husqvarna TX 125 Owner's Manual

15 ELECTRICAL SYSTEM
15.9
15.10
110

Adjusting the headlight range

V00960-10

Changing the combination instrument

V00421-10
V00422-10
The boundary between light and dark must be exactly
on the lower mark for a motorcycle with driver.
» If the light-dark border does not meet specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
–
1
Loosen screw .
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on
the lower marking for a motorcycle with rider (instructions
on how to apply the marking: Checking the headlight set-
ting).
Info
If you have a payload, you may have to correct the
headlight range.
–
1
Tighten screw .
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws with the washers.
–
Pull the combination instrument upward out of the holder.
–
Using a coin, turn protection cap
clockwise and remove it.
–
Remove combination instrument
–
Insert the new battery with the label facing outward.
Combination instrument battery (CR 2032) (
–
Check the O-ring of the protection cap for correct seating.
p. 110)
p. 109)
p. 107)
2
all the way counter-
3
.
p. 146)