Basic Configuration; Uncontrolled Document; Logging In To The Rsgu3500 - Motorola RSGu3500 User Manual

Basic Configuration

The RSGu3500 provides a graphical user interface (GUI) to configure Ethernet, router, DHCP, and security
settings. It is much easier to configure your local area network (LAN) using a RSGu3500 than with traditional
networking equipment. For basic operation, most default settings require no modification.
The following sections describe:
•

Logging In to the RSGu3500

•
Configuration Overview
•
Restoring Defaults for the RSGu3500
•
Logging Out
•
WAN Configuration
•
LAN Configuration
If DHCP is enabled on all of the computers on your network (LAN), you do not need to change any of the default
LAN settings. Unless you have sufficient networking knowledge, we recommend not changing any LAN settings.
For information about advanced configuration, see
Logging In to the RSGu3500

UNCONTROLLED DOCUMENT

1
On a computer connected to the RSGu3500, open a Web browser.
2
In the Address or Location field, type http://192.168.15.1 and press
3
Type router In the Username field.
4
Type router In the Password field (the default is "router" for both fields).
5
Click Log In to display the HOME page:
If you have difficulty starting the GUI, see
RSGu3500 Residential Seamless Mobility Gateway User Guide
Overview Installation Troubleshooting Contact
Configuration: Basic
(see page 10)
(see page 11)
(see page 12)
(see page 13)
(see page 18)
"Troubleshooting"
Advanced
(see page 12)
"Advanced Configuration"
on page 99.
FAQ Specifications Glossary License
TCP/IP Wireless
on page 20.
to display the Log In page.
ENTER
10