Table of Contents
Advertisement
6
Connect the power adapter to the Power port on the rear panel of the voice gateway, and plug the other end
into an electrical outlet.
IMPORTANT:
gateway to complete its start-up process. RSGu3500 startup is complete when the Power light
on its front panel lights solid green. This usually takes a few minutes.
7
Turn on your computer. The Ethernet light on the RSGu3500 front panel should light.
IMPORTANT:
lights are all on.
8
Test your connection. Open a web browser and enter any website address (you can try www.motorola.com).
If you can access the site, you have successfully installed your voice gateway.
9
Repeat step four to connect additional devices.
If your test (STEP 8) is not successful, and you are a:
Cable Modem Users
Turn your cable modem off again for at least 10 minutes. If this does not correct your problem, you may
need to register your RSGu3500 with your cable provider. Please contact them to update your information.
Be sure to have the WAN MAC ID (located on the bottom of the RSGu3500) available. When your Internet
connection works, go to C "Connecting Your Telephone" on page 10.
UNCONTROLLED DOCUMENT
RSGu3500 Residential Seamless Mobility Gateway User Guide
Overview Installation Troubleshooting Contact
Configuration: Basic
Before you continue, be sure to allow enough time for your residential
Before you continue, be sure the RSGu3500 Power, Ethernet, and Internet
FAQ
Specifications Glossary License
Advanced
TCP/IP
Wireless
7
Advertisement
Table of Contents
