Industry Canada (Ic) Statement - Motorola RSGu3500 User Manual

Industry Canada (IC) Statement

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two
conditions:
1
This device may not cause interference, and
2
This device must accept any interference, including interference that may cause undesired operation of the
device.
This device has been designed to operate with an dipole antenna having a maximum gain of 3.8dBi. An antenna having a
higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
EIRP is not more than required for successful communication.
IC Radiation Exposure Statement
IMPORTANT NOTE:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your
body.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
UNCONTROLLED DOCUMENT
Wireless LAN Information
This device is a wireless network product that uses Direct Sequence Spread Spectrum (DSSS) radio technology.
The device is designed to be inter-operable with any other wireless DSSS product that complies with:
•
The IEEE 802.11 Standard on Wireless LANs (Revision B and Revision G), as defined and approved by the
Institute of Electrical Electronics Engineers
•
The Wireless Fidelity (Wi-Fi) certification as defined by the Wireless Ethernet Compatibility Alliance (WECA).
Restrictions on the Use of Wireless Devices
In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building
or responsible representatives of the organization: for example, using wireless equipment in any environment
where the risk of interference to other devices or services is perceived or identified as harmful.
If you are uncertain of the applicable policy for the use of wireless equipment in a specific organization or
environment, you are encouraged to ask for authorization to use the device prior to turning on the equipment.
The manufacturer is not responsible for any radio or television interference caused by unauthorized modification
of the devices included with this product, or the substitution or attachment of connecting cables and equipment
other than specified by the manufacturer. Correction of the interference caused by such unauthorized
modification, substitution, or attachment is the responsibility of the user.
The manufacturer and its authorized re-sellers or distributors are not liable for any damage or violation of
government regulations that may arise from failing to comply with these guidelines.
RSGu3500 Residential Seamless Mobility Gateway
Overview Installation Troubleshooting Contact
Configuration: Basic
FAQ Specifications Glossary License
Advanced TCP/IP Wireless
v