Table of Contents
Advertisement
Front Panel
The front panel provides the following lights:
Light
Description
Indicates the status of the wireless network:
Wireless
If the Wireless LED is
•
Solid green, the wireless network is active.
•
Green and flashing, there is wireless network activitiy.
•
Off, the wireless network is not engaged.
Indicates the status of phone line one and optional line two, respectively:
Phone 1, 2
If the Phone (1, 2, or both) LED is
•
Solid green, the phone for that line is on hook and ready for use.
•
Green and flashing, the phone for that line is ringing or off hook.
•
Orange, you have voice mail.
•
Flashing in unison with the Power light, the residential gateway is downloading a firmware
UNCONTROLLED DOCUMENT
upgrade. Please do not unplug or disconnect your residential gateway while it is
downloading firmware.
•
Off, the phone line is not active. You cannot use it for phone calls.
Internet
Indicates the Internet connection speed:
If the Internet LED is
•
Solid green, your connection speed is
•
Solid yellow, your connection speed is 10Base-T
The LED flashes when there is activity on the Internet connection.
Ethernet 1 -
Indicates that a device is connected to the port and the speed of the Ethernet connection:
4
If an Ethernet LED is
•
Off, no device is connected to the port
•
Solid green, a device is connected to the port (100Base-T)
•
Solid yellow, a device is connected to the port (10Base-T)
A flashing yellow or green LED indicates that there is activity on the Ethernet connection.
Power
If the Power LED is
During the power up, the voice gateway flashes several times while connecting, retrieving the
IP address, and downloading configuration information.
•
During firmware downloads (optional), the Phone and Power LEDs flash rapidly. Please do
not unplug or disconnect your residential gateway while it is downloading firmware.
W
•
When the Power LED is a solid green, the residential gateway is successfully connected.
Pairing
RSGu3500 Residential Seamless Mobility Gateway User Guide
Overview Installation Troubleshooting Contact
Configuration: Basic
red
— blinking or solid — restart the residential gateway.
FAQ
Advanced
TCP/IP
100Base-T
Specifications Glossary License
Wireless
2
Advertisement
Table of Contents
