Basic Configuration - Motorola VT2442 User Manual

Overview

Basic Configuration

The VT2442 provides a graphical user interface (GUI) to configure Ethernet, router, DHCP, and security settings.
It is much easier to configure your local area network (LAN) using a VT2442 than with traditional networking
equipment. For basic operation, most default settings require no modification.
The following sections describe:
•
Logging In to the VT2442
•
Configuration Overview
•
Restarting the VT2442
•
Logging Out (see page 16)
•
WAN Configuration
•
LAN Configuration (see page 21)
If DHCP is enabled on all of the computers on your home network (LAN), you do not need to change any of the
default LAN settings. Unless you have sufficient networking knowledge, we recommend not changing any LAN
settings.
For information about advanced configuration, see
VT2442 Voice Gateway User Guide
Installation Troubleshooting
Configuration:
(see page 14)
(see page 15)
(see page 16)
(see page 17)
Contact
Basic Advanced TCP/IP
"Advanced Configuration"
FAQ Glossary
Wireless
on page 23.
License
13