BIOS Setting
SATA Controller(s)
SATA Mode Selection
Alternate ID
Serial ATA Port 0 – 3 for H110 sku.
Serial ATA Port 0 – 5 for Q170 sku.
Serial ATA Port 0 – 7 for C236 sku.
Software Preserve
Port 0-3 for H110 sku.
Port 0-5 for Q170 sku.
Port 0-7 for C236 sku.
Hot Plug
Spin Up Device
SATA Device Type
BU-2509 SERIES USER
Options
- Disabled
- Enabled
- AHCI
- RAID
- Disabled
- Enabled
No changeable
options
No changeable
options
- Disabled
- Enabled
- Disabled
- Enabled
- Disabled
- Enabled
- Hard Disk Drive
- Solid State Drive
S MANUAL
Chapter 4 AMI BIOS Setup
Description/Purpose
Enables or Disables SATA
Device.
Determines how SATA
controller(s) operate.
Reports the alternate device ID.
Displays the SATA device's
name.
Indicates whether the connected
SATA device supports Software
Setting Preservation (SSP).
Enable or Disable SATA Port
Device.
Enables or Disables Hot Plug
function to designate a SATA
port device as hot-pluggable.
On an edge detection from 0
to 1, the PCH starts a
COMRESET initialization
sequence to the device.
Identifies the SATA port is
connected to Solid State Drive
or Hard Disk Drive.
Page: 4-27