Flash Bios Update - Protech Systems BU-2509 User Manual

Flash BIOS Update

I. Before System BIOS Update
1. Prepare a bootable media (e.g. USB storage device) which can boot system to
DOS prompt.
2. Download and save the BIOS file (e.g. 25090TQ9.bin) to the bootable device.
Copy AMI flash utility – AFUDOS.exe (v5.07) into a bootable device.
3.
4. Make sure the target system can first boot to the bootable device.
(1) Connect the bootable USB device.
(2) Turn on the computer and press <Esc> or <Del> key during boot to enter
BIOS Setup.
(3) The system will go into the BIOS setup menu.
(4) Select [Boot] menu.
(5) Select [Hard Drive BBS Priorities], set the USB bootable device to be the
st
1 boot device.
(6) Press <F4> key to save the configuration and exit the BIOS setup menu.

BU-2509 USER S MANUAL
Appendix A Technical Summary
Page: A-16