Installation and starting up........................ 15 Connections and controls........................21 Operating..............................24 6.1 Starting the device........................... 24 6.2 Main menu............................24 6.3 Menu overview..........................26 6.4 Functions in 5-channel DMX mode................... 27 Technical specifications........................28 Plug and connection assignments....................29 BAT.BALL 6in1 RGBWAP LED effect...
Page 4
Table of contents Troubleshooting............................30 Cleaning............................... 32 Protecting the environment......................33 BAT.BALL 6in1 RGBWAP LED effect...
If you sell the unit please make sure that the buyer also receives this manual. Our products are subject to a process of continuous development. Thus, they are subject to change. BAT.BALL 6in1 RGBWAP LED effect...
Our online guides provide detailed information on technical basics Online guides and terms. Personal consultation For personal consultation please contact our technical hotline. If you have any problems with the device the customer service will Service gladly assist you. BAT.BALL 6in1 RGBWAP LED effect...
Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. BAT.BALL 6in1 RGBWAP LED effect...
Page 9
This combination of symbol and signal word indicates a pos- sible dangerous situation that can result in material and environmental damage if it is not avoided. Warning signs Type of danger Warning – suspended load. Warning – danger zone. BAT.BALL 6in1 RGBWAP LED effect...
This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety. BAT.BALL 6in1 RGBWAP LED effect...
Page 11
Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices. WARNING! Eye damage caused by high light intensity Never look directly into the light source. BAT.BALL 6in1 RGBWAP LED effect...
Page 12
Keep the device away from naked flames. NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. BAT.BALL 6in1 RGBWAP LED effect...
Page 13
Failure to do so could result in damage to the device and possibly the user. Unplug the AC adaptor plug before electrical storms occur and when the device is unused for long periods of time to reduce the risk of electric shock or fire. BAT.BALL 6in1 RGBWAP LED effect...
Automatic mode and sound control Master / Slave operation Display of charge status in battery operation Battery charging time in the device approx. 3 h. Operating time with full light output approx. 3.5 hours in battery operation BAT.BALL 6in1 RGBWAP LED effect...
Unpack and carefully check that there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the device against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. BAT.BALL 6in1 RGBWAP LED effect...
Page 16
Installation and starting up Ceiling or wall mounting The device is designed for ceiling or wall mounting and has for this purpose two mounting tabs on the bottom. BAT.BALL 6in1 RGBWAP LED effect...
Page 17
Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain. NOTICE! Risk of overheating Always ensure sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). BAT.BALL 6in1 RGBWAP LED effect...
Page 18
Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. BAT.BALL 6in1 RGBWAP LED effect...
Page 19
Such a chain may consist of up to 30 DMX devices. Make sure that the output of the last device in the chain is terminated by a resistor (110 Ω, ¼ W). BAT.BALL 6in1 RGBWAP LED effect...
Page 20
DMX input of the first slave unit. Then connect the DMX output of the first slave unit to the DMX input of the second slave unit and so on (maximum 30 slaves). BAT.BALL 6in1 RGBWAP LED effect...
Connections and controls Connections and controls BAT.BALL 6in1 RGBWAP LED effect...
Page 22
[UP]: Button to increase the displayed value by one. [DOWN]: Button to decrease the displayed value by one. [ENTER]: Confirms a selected value. 4 [SWITCH] On / off switch. 5 [POWER] Connector for the power adapter. BAT.BALL 6in1 RGBWAP LED effect...
Page 23
Connections and controls 6 [DMX OUT] DMX output. 7 [DMX IN] DMX input. 8 Slot for an optional battery (not supplied). BAT.BALL 6in1 RGBWAP LED effect...
/ off switch to start operation. 6.2 Main menu Press [MENU] to activate the main menu. Use [UP] or [DOWN] to change the respectively dis- played value. When the display shows the desired value, press [ENTER]. BAT.BALL 6in1 RGBWAP LED effect...
Page 25
1 and 9 (display shows ‘SX_1’ … ‘SX_9’ ). When the dis- play shows the desired value, press [ENTER] to confirm the selection and then [MENU] to return to the parent menu. To return to the parent menu without making changes, press [MENU]. BAT.BALL 6in1 RGBWAP LED effect...
This setting is only relevant if the device is not controlled via DMX. The device can operate in stand-alone mode or control connected devices of the same type, that must be configured as slaves. The auto show can only be activated on the master device. 6.3 Menu overview BAT.BALL 6in1 RGBWAP LED effect...
Intensity red and amber (0 % to 100 %) 0…255 Intensity green and pink (0 % bis 100 %) 0…255 Intensity blue and white (0 % to 100 %) 0…127 Motor position 128…255 Motor speed slow to fast BAT.BALL 6in1 RGBWAP LED effect...
Voltage supply power 100 - 240 V 50/60 Hz adapter Power consumption 20 W max. Housing colour Black Protection class IP20 Dimensions (W × H × D) 182 × 169 × 169 mm Weight 0.48 kg BAT.BALL 6in1 RGBWAP LED effect...
The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for the pin assignment of a suitable XLR plug. Configuration Ground, shielding Signal inverted (DMX–, ‘cold signal’) Signal (DMX+, ‘hot signal’) BAT.BALL 6in1 RGBWAP LED effect...
Never connect the DMX input or output to audio devices such as mixers or ampli- fiers. In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting: BAT.BALL 6in1 RGBWAP LED effect...
Page 31
DMX interface circuits. If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de. BAT.BALL 6in1 RGBWAP LED effect...
The fan grids of the device must be cleaned on a regular basis to remove dust and dirt. Before cleaning, switch off the device and disconnect AC-powered devices from the mains. Use a lint- free damp cloth for cleaning. Never use solvents or alcohol for cleaning. BAT.BALL 6in1 RGBWAP LED effect...
Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. BAT.BALL 6in1 RGBWAP LED effect...