Updating The Instrument Software Over A Network; Updating Software Using Usb Flash - JDS Uniphase OneExpert DSL User Manual

Hide thumbs Also See for OneExpert DSL:
Table of Contents

Advertisement

Updating the instrument software over a network

The OneExpert DSL software can be upgraded in the field using the Ethernet Network port.
To update over an intranet or network
1 Obtain the IP or FTP address where the software file is located, as well as the User Name and
Password.
2
Connect the OneExpert DSL to the AC charger adapter to ensure an uninterrupted supply of
power during the update.
WARNING: ELECTRICAL SHOCK
Electrical shock may result in serious injury or death. Be sure the AC adapter is connected to the
correct voltage mains. Do not use outdoors or in wet locations. Use only the AC adapter supplied
with the tester.
3
From the System Settings menu, select Network Software Update.
4
Touch Update URL and then enter the complete IP address where the file is located.
NOTE
In order for the update to work, you must enter the complete address, including the server and
directory. For example, ftp://ftp.<your company>.com/<directory name>
5
Touch Username and then enter the User Name for the address.
6
Touch Password and then enter the Password for the address.
7
Select the Update system key.
The update status is displayed on the screen.
NOTE:
The update will take several minutes.
The unit powers down when done.

Updating software using USB Flash

The OneExpert DSL software can be upgraded in the field using the USB port.
To update over USB
1
Connect the OneExpert DSL to the AC charger adapter to ensure an uninterrupted supply of
power during the update.
WARNING: ELECTRICAL SHOCK
Electrical shock may result in serious injury or death. Be sure the AC adapter is connected to the
correct voltage mains. Do not use outdoors or in wet locations. Use only the AC adapter sup-
plied with the tester.
2
Connect a USB flash drive to the USB connector on the right panel.
The OneExpert DSL will auto-detect the USB drive. This USB should contain the update file.
3
From the System Settings menu, select Network Software Update.
April 2014
OneExpert DSL User's Guide
22052280, Revision 001
Chapter 3 Utilities
Specifying system settings
21

Advertisement

Table of Contents
loading

Table of Contents