Smart Card Reader - VeriFone V205c Installation Manual

S
ETUP

Smart Card Reader

WARNING
NOTE
Smart Card
Reader
Conducting a Smart
Card Transaction
CAUTION
22
V205 I
C NSTALLATION
Figure 13 Connecting the Power Pack
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors. Disconnecting power during a transaction can cause transaction data
files not yet stored in memory to be lost.
When the terminal has power and an application is loaded, the application starts
after the initial Verifone copyright screen and displays a unique copyright screen.
If no application is loaded, DOWNLOAD NEEDED appears on the display after
the initial Verifone copyright screen.
Verifone recommends installing a power surge protector to protect against
possible damage caused by lightning strikes and electrical surges.
The smart card transaction procedure can vary depending on the application.
Verify the proper procedure with your application provider before performing a
smart card transaction.
Figure 14 Using the Smart Card Reader
To conduct a smart card transaction:
1
Position the smart card with the gold contacts facing upward.
2
Insert the card into the smart card reader slot in a smooth, continuous motion
until it seats firmly.
3
Remove the card when the display indicates the transaction is completed.
Leave the smart card in the card reader until the transaction is completed.
Premature removal can void the transaction.
G
UIDE