Viewing The Connections - Side Connectors - JVC LT-32HG25J Instructions Manual

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all
the channels that you subscribe to. For more information, see "Common
Interface" section.
Important Notice: Side USB Input 1 is for service use only. Note that this
USB connector does not have any other functions such as playing audio
or picture fi les.
Side USB input 2 is available in TV mode. You can use the Media Browser
screen to browse a connected USB device.
HDMI-3: HDMI Input.
Headphone jack is used for connecting an external headphone to the
system. Connect to the HEADPHONE jack to listen to the TV from
headphones (optional).
Video Input (SIDE AV) is used for connecting video signals of external
devices. Connect the video cable between the VIDEO IN socket on the TV
and the VIDEO OUT jack on your device.
Audio Inputs (SIDE AV) are used for connecting audio signals of
external devices. Connect the audio cable between the AUDIO
INPUTS on the TV and the AUDIO OUTPUT jacks on your device.
Note: If you connect a device to the TV via the VIDEO INPUT, you
should also connect your device with an audio cable to the AUDIO INPUTS
INPUT AV
of the TV to enable audio.
S-Video Input is used for connecting an S-VIDEO signal (e.g. from a camcorder or VCR). For using
S-VIDEO input; connect the video cable between the S-VIDEO input on the TV and the S-VIDEO
output on your device. Connect the audio cable between the AUDIO INPUTS (indicated with number 7
in the illustration) on the TV and the audio jacks on your device.
Standby switch is used for turning the TV on or off.
English - 11 -