JVC LT-32EM20 User Manual

JVC LT-32EM20 User Manual

32" class (31.5" diagonal)

Advertisement

LCD Television Users Guide
LT-32EM20
Important Note:
In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your
sales receipt or invoice to the inside cover of this guide. Keep this user's guide in a convenient place for future reference. Keep the
carton and original packaging for future use.
Model Number:
Serial Number:
32" class (31.5" Diagonal)
HIGH-DEFINITION TELEVISION
0808TKH-FU-FU

Advertisement

Table of Contents
loading

Summary of Contents for JVC LT-32EM20

  • Page 1 LCD Television Users Guide LT-32EM20 Important Note: In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user’s guide in a convenient place for future reference. Keep the carton and original packaging for future use.
  • Page 2: Introduction

    NTRODUCTION Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN...
  • Page 3: Trademark Information

    This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 3.2 inches (8cm) or more around this apparatus. Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable. CAUTION: Danger of explosion if battery is incorrectly replaced.
  • Page 4: Supplied Accessories

    NTRODUCTION Supplied Accessories remote control (RM-C-2150) • If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual. • Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local electronics store for these items.
  • Page 5: Table Of Contents

    Features • DTV/TV/CATV You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable subscribers can access their cable TV channels. • Information Display (DTV only) You can display the title, contents and other information of the current DTV program on the TV screen.
  • Page 6: Buttons On The Remote Control

    NTRODUCTION Buttons on the Remote Control Installing the Batteries Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control. Battery Precautions: • Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. •...
  • Page 7: Control Panel

    Control Panel Rear Panel DIGITAL VIDEO 1 AUDIO OUT (COAXIAL) S-VIDEO PC-IN AUDIO HDMI-IN AUDIO 1. POWER (p. 13) Press to turn the unit on and off. 2. INPUT SELECT/ENTER (p. 15) • • 3. CHANNEL K / L (p. 14) Press to select channels or move up/down through the main menu items.
  • Page 8: Preparation

    REPARATION Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the unit to an antenna, cable receiver or satellite box. Note: • Be sure your antenna or other device is connected properly before plugging in the AC power cord. [Antenna Connection] Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.
  • Page 9: External Device Connection

    Cables not included. Please purchase the necessary cables at your local store. External Device Connection [HDMI Connection] HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. It ensures that the content sent from the source to the unit is of the highest possible resolution. Use an HDMI cable to connect the unit to external video devices equipped with HDMI output jack.
  • Page 10 REPARATION Cables not included. Please purchase the necessary cables at your local store. [Component Video Connection] RCA component video connection offers better picture quality for video devices connected to the unit. Use an RCA component video cable to connect the unit to external video devices equipped with component video output jack.
  • Page 11 Cables not included. Please purchase the necessary cables at your local store. [Video Connection] RCA video connection offers standard picture quality for video devices connected to the unit. Use an RCA video cable to connect the unit to external video devices equipped with video output jack. If you connect to the unit’s VIDEO1 or VIDEO2 video input jack, connect an RCA audio cable to the audio L/R jack of VIDEO 1 or VIDEO 2 accordingly.
  • Page 12 REPARATION Cables not included. Please purchase the necessary cables at your local store. [PC Connection] This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a computer monitor.
  • Page 13: Initial Setup

    These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Initial Setup This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and auto channel scan, which automatically scans and memorizes viewable channels.
  • Page 14: Watching Tv

    ATCHING TV Channel Selection Select channels by using [CHANNEL / ] or [the Number buttons]. • To select the memorized channels, use [CHANNEL / ] or [the Number buttons]. • To select the non-memorized channels, use [the Number buttons]. To Use [the Number buttons] When selecting analog channel 12 When selecting digital channel 12-1 Be sure to press [–] before entering the minor...
  • Page 15: Still Mode

    Still Mode You can pause the image shown on the TV screen. Press [STILL] to pause the image shown on the TV screen. Still • The sound output will not be paused. • If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted.
  • Page 16: Screen Information

    ATCHING TV Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. In the analog mode, the current channel number and the audio mode are displayed. Press [INFO]. 480i 480i TV-PG DLSV •...
  • Page 17: Tv Screen Display Mode

    TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal. Press [SCREEN MODE] repeatedly to switch the TV aspect ratio.
  • Page 18: Optional Setting

    PTIONAL SETTING Main Menu This section describes the overview of the main menu displayed when you press [SETUP]. For more details, see the reference page for each item. The main menu consists of the function setting items below. Press [SETUP]. EXIT To exit settings.
  • Page 19: Channel List

    Note: • After setting “Auto Channel Scan”, using [CHANNEL ] on the remote control skips unavailable programs automatically. • If you connect the cable system directly, contact the CATV installer. • If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled.
  • Page 20: Manual Register

    PTIONAL SETTING Manual Register The manual register function lets you add the channels that were not scanned by the auto channel scan due to the reception condition at the initial setup. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “CHANNEL”, then press [ENTER].
  • Page 21: Language Selection

    Language Selection You can choose English, Spanish, or French as your on-screen language. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “LANGUAGE”, then press [ENTER]. Use [Cursor K / L] to select “English”, “Español” or “Français”, then press [ENTER].
  • Page 22: Picture Adjustment

    PTIONAL SETTING Picture Adjustment You can adjust brightness, contrast, color, tint and sharpness. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “PICTURE”, then press [ENTER]. Use [Cursor K / L] to select the item you want to adjust, then press [ENTER].
  • Page 23: Sound Adjustment

    Sound Adjustment You can adjust treble and bass. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “SOUND”, then press [ENTER]. Use [Cursor K / L] to select the sound type you want to adjust, then press [ENTER]. Adjust the sound setting.
  • Page 24: Closed Caption

    PTIONAL SETTING Closed Caption You can view closed captioning (cc) for TV programs, movies and news. Closed caption refers to text of dialogue or descriptions displayed on- screen. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “DETAIL”, then press [ENTER].
  • Page 25: Dtv Closed Caption

    DTV Closed Caption In addition to the basic closed caption described on page 24, DTV has its own closed caption called DTV CC. Use this menu to change the settings for DTV CC. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “DETAIL”, then press [ENTER].
  • Page 26: Cc Style

    PTIONAL SETTING CC Style You can change the CC style such as font, color or size, etc. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “DETAIL”, then press [ENTER]. Use [Cursor K / L] to select “Closed Caption”, then press [ENTER].
  • Page 27 Font Color Font color of the displayed caption can be switched as below. CC Style CC Style User Setting Font Style Font Size Font Color Font Opacity Back Color Back Opacity Edge Color Edge Type Font Opacity Font opacity of the displayed caption can be switched as below.
  • Page 28: V-Chip

    PTIONAL SETTING V-chip V-chip reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programming inappropriate for children. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “DETAIL”, then press [ENTER].
  • Page 29 A. MPAA Rating A. MPAA Rating MPAA Rating is the rating system created by MPAA (Motion Picture Association of America). Use [Cursor K / L] to select “MPAA Rating”, then press [ENTER]. Use [Cursor K / L] to select the desired rating, then press [ENTER] repeatedly to switch between “View”...
  • Page 30 PTIONAL SETTING Rating Category TV-MA Mature audience only TV-14 Unsuitable for children under 14 TV-PG Parental guidance suggested TV-G General audience Appropriate for all children 7 and TV-Y7 older TV-Y Appropriate for all children Sub Rating Category Fantasy Violence Violence Sexual Situation Coarse Language Suggestive Dialogue...
  • Page 31: Pc Settings

    PC Settings This function lets you adjust the PC screen position, clock and phase during PC input. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “DETAIL”, then press [ENTER]. Use [Cursor K / L] to select “PC Settings”, then press [ENTER].
  • Page 32: Hdmi Audio

    PTIONAL SETTING HDMI Audio You can set the method of sound input for the HDMI1 input jack. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “DETAIL”, then press [ENTER]. Use [Cursor K / L] to select “HDMI1 Audio”, then press [ENTER].
  • Page 33: Troubleshooting

    ROUBLESHOOTING Question My remote control does not work. What should I do? How come the Initial setup appears every time I turn on this unit? Why I cannot watch some of TV programs? How come there is no image from the connected external devices? Whenever I entered channel number, it changes automatically.
  • Page 34: Troubleshooting Guide

    ROUBLESHOOTING Troubleshooting Guide If the unit does not perform properly when operated as instructed in this users guide, check the following chart and all connections once before calling for service. Symptom No power Control button does not work Power is ON but no screen image No picture or sound No color Sound OK, picture poor...
  • Page 35 Symptom You switch to a different input and the volume You switch to a different input and the screen size changes The display image does not cover the entire screen Captions are displayed as a white box. No caption is displayed in the Closed Caption-supported program.
  • Page 36: Glossary

    NFORMATION Glossary ATSC Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square);...
  • Page 37: Cable Channel Designations

    Cable Channel Designations If you subscribe to cable TV, the channels are displayed as 1-135. Cable companies often designate channels with letters or letter-number combinations. Please check with your local cable company. The following is a chart of common cable channel designations. CATV channel TV Display CATV channel...
  • Page 40 JVC Loves the Earth JVC COMPANY OF AMERICA Division of JVC Americas Corp. 1700 Valley Road Wayne, New Jersey, 07470 Printed in China A8AFRUH 1EMN24099 ★★★★★...

Table of Contents