Table of Contents
Advertisement
Viewing the Connections -
Side Connectors
1.
CI Slot is used for
inserting a CI card.
A CI card allows
you to view all the
channels that you
subscribe to. For
more information,
see "Common
Interface" section.
2.
Side USB input.
Note: Codec
update cannot be
performed.
3.
Side HDMI Input
is for connecting a
device that has an
TM
HDMI
connector.
4.
Headphone jack is
used for connecting
an external
headphone to the
system. Connect to
the HEADPHONE
jack to listen to the TV from headphones
(optional).
5.
Video Input
(INPUT FAV) is used for connecting
video signals of external devices. Connect
the video cable between the VIDEO IN socket
on the TV and the VIDEO OUT jack on your
device.
6.
Audio Inputs
(INPUT FAV) are used for
connecting audio signals of external devices.
Connect the audio cable between the AUDIO
INPUTS on the TV and the AUDIO OUTPUT
jacks on your device. Note: If you connect a
device to the TV via the VIDEO INPUT, you
should also connect your device with an audio
cable to the AUDIO INPUTS of the TV to
enable audio.
7.
Standby switch is used for turning the TV on
or off.
Side HDMI Connection
You can use side HDMI input to connect a device that
has an HDMI connector to your TV. Use
an appropriate HDMI cable to make such a connection.
Note that you should switch to HDMI-4 source to view
the content from the connected device. Power off both
the TV and the device
before making any connections.
• Side HDMI Input supports connections between
HDMI devices such as DVD players. You can use
INPUT AV
English - 9 -
side HDMI input of the TV to connect to an external
HDMI device. Use an HDMI cable to connect.
HDMI DEVICE
Power Connection
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the
ambient room temperature before you connect the
set to the mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL
INPUT socket located at the rear of the TV.
Using the Cable Holder
You can use the supplied cable holder as the
following:
• Place the cable holder into the cable holder hole
located on the rear side of the TV as illustrated
above.
• Place cables into the cable holder after all necessary
connections are made.
SIDE VIEW
Advertisement
Table of Contents
