Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 220 V - 240 V AC
50 Hz.
• Switch the "
" button on the left side pannel to
position "|" so the TV will switch to standby mode.
• To switch on the TV from standby mode either:
" button,
• Press the "
on the remote control.
• Press the
or
The TV will then switch on and the Power LED lights
up.
Note: If you switch on your TV via PROGRAMME UP/DOWN
buttons on the remote control or on the TV set, the programme
that you were watching last will be reselected.
To Switch the TV Off
• Switch the "
" button to position 2 as illustrated,
(
) so the TV will switch OFF.
• To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode, Power LED
can blink to indicate that Over Air Download is active.
/
or a numeric button
button on the TV.
Using the Cable Holder
You can use the supplied cable holder as follows.
• Place the cable holder into the cable holder hole
located on the rear side of the TV as illustrated
above.
• Place cables into the cable holder after all necessary
connections are made.
English - 8 -