Disengaging The Blade-Control Switch (Pto); Operating The Throttle; Operating The Choke - Toro TimeCutter SW 4200 Operator's Manual

Disengaging the
Blade-Control Switch
(PTO)
Figure 15

Operating the Throttle

You can move the throttle control between F
S positions (Figure
LOW
Always use the F position when engaging the PTO.
AST
Figure 16
AST
16).

Operating the Choke

Use the choke to start a cold engine.
1. Pull up the choke knob to engage the choke
before using the key switch
Note:
Ensure that you fully engage the choke.
You may need to hold the knob up when you
use the key switch.
2. Push down the choke to disengage the choke
after the engine has started
g009174
and
1. O position
N
g187517
21
(Figure 17).
(Figure 17).
Figure 17
2. O position
FF
g008959