Data Disc Play Operation - Pyle View PLTDF25 Owner's Manual

Use , cursor button to select the
item that you want to program.
1) The item you selected will become
highlighted.
2) Input the track number that you want to
program by numeric buttons (0~9) on the
remote control.
3) Press ,
move to "PLAY" operation button and
then press ENTER
program the playback.
- In DVD/MP3 playback mode, press
PROG button (32) to activate program
edit interface as follow:
Use , cursor button to select the
item that you want to program.
1) The item you selected will become
highlighted.
2) Input the track number that you want to
program by numeric buttons (0~9) on the
remote control.
3) Press ,
move to "PLAY" operation button and
then press ENTER
program the playback.
Frequently Asked Questions
- I inserted a DVD disc, but it cannot be
played. The message "REGION
ERROR" is displayed.
DVD players and discs all have "REGION
CODES". If the region code number on
the DVD disc does not correspond to the
region number of this DVD player, the
unit cannot play the disc.
- When I insert a DVD disc, there is a
window shown on the screen that
requires entering 4 characters
password. why?
User's Manual - page 15
cursor buttons to
button (18) to
cursor buttons to
button (18) to
The current disc has a "Parental Control"
level, and the player's parental level is
set below the level of the disc. To view
this disc, you should enter the correct
password to play the disc normally.
NOTE:
For how to set the "Parental Control"
level, please refer to "Parental Control"
on page 18.

Data Disc Play Operation

When you insert a data disc including
audio (MP3), movie (MPEG) or picture
(JPG) files into the disc slot, the following
media play window will be shown on the
screen:
Work area A:
folder list
Work area B:
files list
Work area C:
(1): playback audio mode (default)
(2): viewing picture mode
(3): playback movie mode
Work area D:
file information display
1. Press button to move between
work area A, work area B and work area
C.
2. Press button to select the desired
folder or file of this work area.
3. Press ENTER button (18) to confirm
the selected item.
4. In picture views or movie playback
mode, if you want to return to the
previous menu, press (STOP) button.