General Operation - Pyle View PLTDF25 Owner's Manual

GENERAL OPERATION

Initial System Start-Up
Be sure to press the
When using the unit for the first time,
after all connections are completed
correctly.
1. Turn off the unit power.
2. Press RESET
similar pointed object.
Turning Power On and Off
Press button (1) or insert a disc to
turn on the unit.
When system is on, press
turn off the unit.
Loading/Removing a Disc
1. Insert the disc into the disc slot (7)
with the printed side facing up. The
player will play the disc automatically.
2. Whenever press
the disc.
Adjusting the volume level
Press VOL+/VOL-
the volume level.
Input Source Select
Press MODE button (3) to switch to the
desired input source.
The mode will change each time the
button is pressed.
DVD
In TV mode, pressing
button (3) on the unit for several seconds
will enter into searching state
automatically.
ESP Function
This unit features ESP (anti-shock)
protection. It works by "playing ahead"
and buffering the stored part of the
program, playing it back when the
realtime portion of the program has been
disrupted. Depending on the
listening/viewing mode you are in, the
amount of time of disruption which can be
hidden is as follows:
User's Manual - page 9
RESET button ( 12)
with a ballpoint pen or
button (1) to
button (6) to eject
button (26) to adjust
TV AV
MODE/SCAN
CD, VCD: 18 seconds
MP3:160 seconds
DVD: 6 seconds
MPEG4: 20 seconds
Last Position Memory Feature
- During disc playback, if you press
button (1) to turn off the unit and then
press the button again to turn on the unit,
the DVD unit will resume playing from the
point that it was interrupted.
-During disc playback, if you press the
MODE button (3) to switch to other mode,
and then return to DVD mode again, the
unit will resume playing from the point
that it was interrupted.
Reset Function
RESET button on the housing must be
activated with either a ballpoint pen or
thin metal object. The
is to be activated at the following times:
-After initial installation of the unit when
all wiring is completed.
-Some of the function buttons do not
operate.
- Error symbol appears on the display.
Note:
If the unit still does not function after you
have pressed RESET
connectors which link the panel and the
main housing with a cotton swab
moistened with isopropyl (rubbing
alcohol). If it still does not work, bring the
unit to your dealer for servicing or advice.
RESET button (12)
, try cleaning the