Panasonic WV-V6430L Operating Instructions Manual page 69

Refer to the following sheet for detailed information.
Parameter
Enable
Working Period
Record
Record Delay
Relay out
Alarm Delay
Send Email
PTZ
Snapshot
Set working period.
Click "Setup", and it will display the interface of working period. See Figure 7-51.
Please refer to the explanation of VMD working period.
You need to check the box to enable this function.
Video masking function becomes activated in the specified periods.
•
• There are six periods in one day. Draw a circle to enable
corresponding period.
Select date. If you do not select, current setup applies to today only.
•
You can select all week column to apply to the whole week.
After record is enabled, video masking can activate video.
System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
System can delay the alarm output for specified time after alarm ended.
The value ranges from 10s to 300s.
If you enabled this function, System can send out email to alert you when
alarm occurs.
Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.
The event type includes: preset, tour and pattern.
After snapshot is enabled and alarm happens, the system will
automatically snapshot and alarm.
Figure 7-51
Function
65