Remote Control; Remote Control Battery - Pyle PLTV7.5DIN User Manual

2. REMOTE CONTROL

3. REMOTE CONTROL BATTERY

- Do not insert battery in the wrong direct
- Be sure to observe the correct polarity (+/-) a
battery compartment.
- It is dangerous to charge/heat/open or short circuitry the battery.
- Please remove the battery in case of not using the remote control f
- It is time to replace the battery if the remote control does not work properly or if the
operating range becomes reduced.
- Should battery leakage occur, cle
with a new battery.
INCORRECT BATT
CORROSION DAMAGE.
U SING THE REMOTE CONTROL
- The remote control should be aimed directly towards the remot
- Avoid dropping the remote control.
- Avoid spilling liquids on the remote c
heat.
- The remote control should be pointed at the remote sensor in order
for the Unit Monitor to function correctly.
- Distance: Maximum of 16 feet from the fron
- Angle: Approximately +/-30 from center.
- Please do not locate the Unit where direct
illumination might shine directly at the remote sensor.
an the battery compartment with a soft cloth and replace
ERY USEAGE MIGHT CAUSE EARLY DISCHARGE, LEAKAGE OR
1 . POWER ON/OFF BUTTON
2 . TILT UP/DOWN BUTTON
3 . OPEN/CLOSE BUTTON
4 . MODE SELECTION BUTTON
5 . SOUND MUTE BUTTON
6 . NAVIGATION BUTTON
7 . ASPECT SELECTION BUTTON
8 . SEARCH UP/DOWN BUTTON
9 . VOL ◀ / ▶: TILT UP/DOWN BUTTON
1 0. MENU BUTTON
1 1. MANUAL SEARCH BUTTON
1 2. A TO SEA CH/ AUTO U
13. BAND SELECTION BUTTON
1 4. NUMERIC BUTTONS
ion.
s indicated in the
ontrol or exposing it to extreme
t of the remote sensor.
sunlight or fluorescent
8
R M EMORY BUTTON
or a long period of time.
e sensor of the Unit.