Table of Contents
Advertisement
Available languages
Available languages
OPERATION USING EXTERNAL DEVICES
DIGI LINK
Your television is equipped with
the DIGI LINK function.
This function uses the CEC
(Consumer Electronics Control)
protocol.
CEC allows external devices which are connect-
»
«
ed to the
HDMI
sockets by an HDMI cable
(e.g. DVD player) to be operated with a remote
control.
Prerequisite is that the devices connected support
CEC. Read the operating manual for the external
device to find out how to activate the correspond-
ing function.
The DIGI LINK functions on your
television
Switching on the television
automatically from standby
»
If the
Autom. switch-on TV
»
«
(
On
), then once the external device (e.g.
DVD player) is switched on, the television also
switches on and the appropriate HDMI preset is
selected.
Automatic selection of the HDMI
preset on the television
If your television is switched on and you then
switch on the external device (e.g. DVD player),
the appropriate HDMI preset on the television
will be selected.
Selecting the menu language
The television menu language is automatically
selected on the external device (e.g. DVD player).
The external device must support this function.
Switching off the external device
automatically
If you switch your television to standby, the ex-
ternal device (if it is switched on) will also be
switched to standby.
DIGI LINK is always active on your television set.
«
function is activated
Searching for and activating
external devices
You can connect up to 11 devices with DIGI LINK
functions to your television.
1
Open the menu with »MENU«.
2
Select the menu item »SOURCE SETUP« with
»C« or »D« end press »OK« to confirm.
– »Source Setup« menu will be displayed.
3
Select the line »SOURCE« with »C« or »D«
and press »OK« to confirm.
4
Select the source »HDMI1« or »HDMI2«
with »C« or »D« and press »OK« to confirm.
5
Select the line »Device Selection« with »C«
or »D« and press »OK« to confirm.
– »HDMI CEC Device List« menu will be dis-
played.
6
Start the device search with » « (red).
– The devices found are displayed in the
menu.
7
Select the device for operation with »C«,
B
A
»D«, »
« or »
it.
– If the selected device is connected to a
different input to the current one, a switch
to the respective input will occur auto-
matically.
8
Press »MENU« to end the setting.
-----------------------------
« and press »OK« to mark
ENGLISH
45
Advertisement
Chapters
Table of Contents
