Table of Contents
Advertisement
Available languages
Available languages
INFORMATION
Displaying signal information
(for digital channels only)
1
Open the menu with »MENU«.
»
2
Select the line
»D«
or
and press
»
3
Select the line
Signal Information
»C«
»D«
or
and press
– Information on the channel, network,
modulation, symbol rate, quality and
signal strength is displayed.
Notes:
The signal information changes in ac cord-
7
ance with the current input source.
The signal properties are displayed in the
7
lower section of the menu. The further the
»
bars for
Quality
extend to the right, the better the reception
signal.
The signal level not only depends on your
7
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna based upon
the signal level display.
4
Press »MENU« to close the menu.
62
ENGLISH
---------------------------------------------------------------------------------------------------------------------
«
SOURCE SETUP
with
»
«
OK
to confirm.
«
with
»
«
OK
to confirm.
«
»
and
Signal Strenght
»C«
«
Advertisement
Chapters
Table of Contents
